Aricent Leaders in Communications Software - Aricent
 
HomeAbout UsProductsOutsourcing ServicesSolutionsSupport
Partners Partners  Our Financials  Investor Relations  Careers Careers  Locations Locations  Contact Us Contact Us  
          
  Overview
  IMS
  GPRS/UMTS Stacks
  SIGTRAN & SS7
  Access Stacks
  VoP Stacks
  Datacom Stacks

Your Location : Home > Protocol Stacks > Broadband V5


Overview | Features | Aricent Deliverables | FAQ


Broadband V5 (VB5) Overview

VB5 Interface specifies the physical, procedural and protocol requirements for interfaces at the reference point between Access Network (AN) and Service Node (SN). The VB5 specification is split into two types.

VB5.1 provides for VPC's and VCC's provisioned in the Access Network via the Q3 management interface by using Real Time Management Coordination (RTMC) protocol. RTMC protocol is used to communicate management information about resources in real time across VB5 interface between Access Network (AN) and Service Node (SN).

VB5.2 adds to VB5.1 the ability of the associated Service Node to allocate AN resources on demand via a Broadband Bearer Channel Connection (B-BCC) protocol. B-BCC protocol is used for dynamic allocation of resources in AN under the control of SN.

VB5 Reference Configuration
VB5 Reference Configuration

 

VB5 protocol stack has been ported on the following operating systems:

  • VxWorks
  • Solaris
  • Linux
  • NT
  • Proprietary Operating System
Applications

VB5 can be used for following typical Applications:

  • IP Router
  • ATM VC switch
  • Fiber To The Home (FTTH) / Fiber To The Curb (FTTC) / Fiber To The Building (FTTB)
  • Video on Demand (VOD)
  • Switched Video Broadcasting (SVB)
  • VP leased line
Configuration

The figure given below shows the VB5 reference point between an Access Network (AN) and Service Node (SN).


VB5 Reference Configuration

Standards Conformance

Aricent VB5 Protocol stack product complies with the following standards:

  • ITU specs - G967.1 -- V-Interfaces at the Service Node (SN) - VB5.1 Reference Point Specification
  • ETSI specs - EN 301 005 -- V-Interface at the VB5.1 reference point for the support of broadband or combined narrowband & broadband Access Networks (AN)
  • ITU specs - G967.2 -- V-Interfaces at the Service Node (SN) - VB5.2 Reference Point Specification
  • ETSI specs - EN 301 217 -- V-Interface at the VB5.2 reference point for the support of broadband or combined narrowband & broadband Access Networks (AN)

Aricent Equipment Manager Application Product provides the NE-OpS interface for VB5 Management entities. It complies with the following standards for meeting VB5 Protocol Stack requirements:

  • ITU recommendations Q.832.1 -- VB5.1 Management
  • ITU recommendations Q.832.2 -- VB5.2 Management and Broadband Access Coordination



Last updated : March 17, 2006

 

Customer Quote
  Case Studies
  Press Releases
  Whitepapers
  Partners